r.form SE 5 - Rhenus Rotanor CYC

Description

r.form SE 5 is a clear, low odour stamping oil, free of chlorine and aromatics.

Application

r.form SE 5 is used for stamping of thin steel plates, i.e. for transformer and electric motors.
The thin lubricating film of this special oil evaporates within a short time. Hence the sheets
cannot stick together and do not slide during assembly.
Due to the evaporation effect, a high cooling effect is achieved within the cutting area.
r.form SE 5 incorporates polar additives providing good wettability and a good lubricity within the cutting area.